HP VPN Firewall Appliances Network Management Configuration Guide

72
Configuring an MST region
1. From the navigation tree, select Network > MSTP > Region.
The page as shown in Figure 45 appears.
Figure 45 MSTP region
2. Click Modify.
The MSTP Region Configuration page as shown in Figure 46 appears.
Figure 46 Modifying an MSTP region
3. Configure the MST region information as described in Table 12.
4. Click Activate.
Table 12 Configuration items
Item Descri
p
tion
Region Name Set the MST region name.
Revision Level Set the revision level of the MST region.
Manual
Select the ID of the MSTI to be configured, enter VLAN IDs to be mapped to the
MSTI, and click Apply to add the VLAN-to-instance mappings to the
VLAN-to-instance mapping table.