HP VPN Firewall Appliances Network Management Configuration Guide

932
Ste
p
Command Remarks
5. Match BGP routing
information whose
AS_PATH attribute is
specified in the AS path
lists.
if-match as-path
AS-PATH-number&<1-16>
Optional.
Not configured by default.
Support for the if-match as-path
command depends on the device
model.
6. Match BGP routing
information whose
COMMUNITY attribute
is specified in the
community lists.
if-match community
{ { basic-community-list-number |
comm-list-name } [ whole-match ] |
adv-community-list-number }&<1-16>
Optional.
Not configured by default.
Support for the if-match community
command depends on the device
model.
7. Match BGP routing
information whose
extended community
attribute is specified in
the extended community
lists.
if-match extcommunity
ext-comm-list-number&<1-16>
Optional.
Not configured by default.
8. Match routes having the
specified cost.
if-match cost value
Optional.
Not configured by default.
9. Match routing
information having
specified output
interfaces.
if-match interface { interface-type
interface-number }&<1-16>
Optional.
Not configured by default.
10. Match routing
information having MPLS
labels.
if-match mpls-label
Optional.
Not configured by default.
11. Match routing
information having the
specified route type.
if-match route-type { external-type1 |
external-type1or2 | external-type2 |
internal | is-is-level-1 | is-is-level-2 |
nssa-external-type1 |
nssa-external-type1or2 |
nssa-external-type2 } *
Optional.
Not configured by default.
Support for keywords is-is-level-1
and is-is-level-2 depends on the
device model.
12. Match RIP, OSPF, and
IS-IS routing information
having the specified tag
value
if-match tag value
Optional.
Not configured by default.
Support for the value argument
depends on the device model.
Configuring apply clauses
Follow these guidelines when you configure apply clauses:
• The difference between IPv4 and IPv6 apply clauses is the command for setting the next hop for
routing information.
• The apply ip-address next-hop and apply ipv6 next-hop commands do not apply to redistributed
IPv4 and IPv6 routes.
To configure apply clauses for a routing policy: