HP VPN Firewall Appliances Network Management Configuration Guide

935
Displaying and maintaining the routing policy
Task Command Remarks
Display BGP AS path list
information.
display ip as-path [ as-path-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display BGP community list
information.
display ip community-list
[ basic-community-list-number |
adv-community-list-number | comm-list-name ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Display BGP extended community
list information.
display ip extcommunity-list
[ ext-comm-list-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display IPv4 prefix list statistics.
display ip ip-prefix [ ip-prefix-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display IPv6 prefix list statistics.
display ip ipv6-prefix [ ipv6-prefix-name ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Display routing policy information.
display route-policy [ route-policy-name ] [ | { begin
| exclude | include } regular-expression ]
Available in any
view.
Clear IPv4 prefix list statistics. reset ip ip-prefix [ ip-prefix-name ]
Available in user
view.
Clear IPv6 prefix list statistics. reset ip ipv6-prefix [ ipv6-prefix-name ]
Available in user
view.
Routing policy configuration examples
Applying a routing policy to IPv6 route redistribution
Network requirements
• In Figure 414, enable RIPng on Firewall and Router.
• Configure three static routes on Firewall.
• On Firewall, enable static route redistribution into RIPng and apply a routing policy to permit routes
20::/32 and 40::/32 and deny route 30::/32.
Figure 414 Network diagram
Configuration procedure
1. Configure Firewall: