HP VPN Firewall Appliances Network Management Configuration Guide

937
via FE80::7D58:0:CA03:1, cost 1, tag 0, A, 18 Sec
Dest 20::/32,
via FE80::7D58:0:CA03:1, cost 1, tag 0, A, 8 Sec
Dest 40::/32,
via FE80::7D58:0:CA03:1, cost 1, tag 0, A, 3 Sec
Applying a routing policy to filter received BGP routes
Network requirements
• All the devices in Figure 415 run BGP. Router C establishes EBGP connections with Router A, Router
B, and Firewall.
• Configure a routing policy on Firewall to reject routes from AS 200.
Figure 415 Network diagram
Configuration procedure
1. Configure IP addresses for interfaces. (Details not shown.)
2. Configure BGP:
# Configure Router A.
<RouterA> system-view
[RouterA] bgp 100
[RouterA-bgp] router-id 1.1.1.1
[RouterA-bgp] peer 1.1.1.2 as-number 300
# Configure Router B.
<RouterB> system-view
[RouterB] bgp 200
[RouterB-bgp] router-id 2.2.2.2
[RouterB-bgp] peer 1.1.2.2 as-number 300
# Configure Router C.
<RouterC> system-view
[RouterC] bgp 300
[RouterC-bgp] router-id 3.3.3.3