HP VPN Firewall Appliances Network Management Configuration Guide

943
To configure an SSL server policy:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an SSL server policy
and enter its view.
ssl server-policy policy-name N/A
3. Specify a PKI domain for the
SSL server policy.
pki-domain domain-name
Optional.
By default, no PKI domain is
specified for an SSL server policy,
and the SSL server generates and
signs a certificate for itself and
does not obtain a certificate from a
CA server.
If SSL clients authenticate the server
through a digital certificate, you
must use this command to specify a
PKI domain and request a local
certificate for the SSL server in the
PKI domain.
For information about how to
configure a PKI domain, see VPN
Configuration Guide.
4. Specify the cipher suites for
the SSL server policy to
support.
• In non-FIPS mode:
ciphersuite
[dhe_rsa_aes_128_cbc_sha |
dhe_rsa_aes_256_cbc_sha |
rsa_3des_ede_cbc_sha |
rsa_aes_128_cbc_sha |
rsa_aes_256_cbc_sha |
rsa_des_cbc_sha |
rsa_rc4_128_md5 |
rsa_rc4_128_sha ] *
• In FIPS mode:
ciphersuite
{ dhe_rsa_aes_128_cbc_sha |
dhe_rsa_aes_256_cbc_sha |
rsa_aes_128_cbc_sha |
rsa_aes_256_cbc_sha }
Optional.
By default, an SSL server policy
supports all cipher suites.
Support for the
rsa_3des_ede_cbc_sha and the
rsa_aes_256_cbc_sha keywords
depends on the device model. For
more information, see the
command reference.
5. Set the handshake timeout
time for the SSL server.
handshake timeout time
Optional.
3600 seconds by default.
6. Set the SSL connection close
mode.
close-mode wait
Optional.
Not wait by default.
7. Set the maximum number of
cached sessions and the
caching timeout time.
session { cachesize size | timeout
time } *
Optional.
The defaults are as follows:
• 500 for the maximum number
of cached sessions,.
• 3600 seconds for the caching
timeout time.