HP VPN Firewall Appliances Network Management Configuration Guide

946
HTTPS login using the default certificate
configuration example
Network requirements
As shown in Figure 419, configure the firewall as the HTTPS server that uses an SSL server policy to protect
Web login. The firewall and the host use the default certificate for identity authentication.
Figure 419 Network diagram
Configuration procedure
Configuring the firewall in the Web interface
1. Configure the HTTPS service:
a. Log in to the Web interface of the firewall.
b. Navigate to Device Management > Service Management.
c. Select Enable HTTPS service, and use the default certificate and the default port number.
d. Click Apply.
Figure 420 Configuring the HTTPS service
2. Configure a local user:
a. Navigate to User > Local User.
b. Add a local user as shown in Figure 421.
Spec
ify both the user name and password as admin1.
c. Click Apply.