HP VPN Firewall Appliances VPN Command Reference

117
Views
L2TP group view
Default command level
2: System level
Usage guidelines
The tunnel avp-hidden command is available to only LACs.
This command takes effect only when tunnel authentication is enabled.
Examples
# Enable transferring AVP data in hidden mode.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel avp-hidden
Related commands
tunnel authentication
tunnel flow-control
Use tunnel flow-control to enable the L2TP tunnel flow control function.
Use undo tunnel flow-control to disable the L2TP tunnel flow control function.
Syntax
tunnel flow-control
undo tunnel flow-control
Default
The L2TP tunnel flow control function is disabled.
Views
L2TP group view
Default command level
2: System level
Examples
# Enable the L2TP tunnel flow control function.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel flow-control
tunnel name
Use tunnel name to specify the name of a tunnel at the local end.
Use undo tunnel name to restore the default.