HP VPN Firewall Appliances VPN Command Reference

9
Tunneling commands
default
Use default to restore the default settings for the tunnel interface.
Syntax
default
Views
Tunnel interface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it in a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. You can identify these commands by using the display this
command in interface view, and then use their undo forms or follow the command reference to
individually restore their default settings. If your restoration attempt still fails, follow the error message to
resolve the problem.
Examples
# Restore the default settings of interface tunnel 1.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] default
This command will restore the default settings. Continue? [Y/N]:y
description
Use description to configure a description for a tunnel interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of a tunnel interface is Tunnelnumber Interface, for example, Tunnel1 Interface.