HP VPN Firewall Appliances VPN Command Reference

175
undo hub private-ip private-ip-address
Default
No hub is configured.
Views
VPN domain view
Default command level
2: System level
Parameters
private-ip-address: Specifies the private IP address of the hub.
public-ip public-ip-address: Specifies the public IP address of the hub.
Usage guidelines
The public IP address is optional. The VAM server can get the public address of a hub when the hub
registers.
Up to two hubs can be configured on a VAM server.
Examples
# Configure a hub for VPN domain 1, setting the public and private IP addresses as 123.0.0.1 and
10 .1.1.1, r e s p e c t i v e l y.
<Sysname> system-view
[Sysname] vam server vpn 1
[Sysname-vam-server-vpn-1] hub private-ip 10.1.1.1 public-ip 123.0.0.1
Related commands
vam server vpn
keepalive interval
Use keepalive interval to set the interval for a VAM client to send keepalive packets to the VAM server.
Use undo keepalive interval to restore the default.
Syntax
keepalive interval time-interval
undo keepalive interval
Default
The client keepalive interval is 180 seconds.
Views
VPN domain view
Default command level
2: System level
Parameters
time-interval: Interval for a VAM client to send keepalive packets to the VAM server, in the range of 5 to
65535 seconds.