HP VPN Firewall Appliances VPN Command Reference

179
Examples
# Enable the VAM server feature for all VPN domains.
<Sysname> system-view
[Sysname] vam server enable all
Related commands
• display vam server statistic
• server enable
• vam server vpn
vam server ip-address
Use vam server ip-address to configure the listening IP address and UDP port number for a VAM server.
Use undo vam server ip-address to remove the configuration.
Syntax
vam server ip-address ip-address [ port port-number ]
undo vam server ip-address
Default
A VAM server has neither listening IP address nor UDP port number configured.
Views
System view
Default command level
2: System level
Parameters
ip-address: Listening IP address of the VAM server.
port-number: Listening UDP port of the VAM server, in the range of 1025 to 65535. The default is 18000.
Usage guidelines
If you do not specify a listening IP address and port number on a VAM server, the VAM server listens to
all packets whose destination IP address is a local interface IP address and destination port number is
18000.
If you execute this command repeatedly, the last configuration takes effect.
Examples
# Configure the VAM service listening address to 10.1.1.1 and UDP port number to 2000.
<Sysname> system-view
[Sysname] vam server ip-address 10.1.1.1 port 2000
Related commands
vam server vpn
vam server vpn
Use vam server vpn to create a VPN domain, enter VPN domain view, or both.