HP VPN Firewall Appliances VPN Command Reference

12
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify the tunnel keyword, this command displays information about all interfaces on the
device.
If you specify the tunnel keyword without the number argument, this command displays information
about all existing tunnel interfaces.
Examples
# Display detailed information about interface Tunnel 0.
Tunnel0 current state: UP
Line protocol current state: UP
Description: Tunnel0 Interface
The Maximum Transmit Unit is 1476
Internet Address is 1.1.1.1/24 Primary
Encapsulation is TUNNEL, service-loopback-group ID not set.
Tunnel source 10.1.1.1, destination 10.1.1.2
Tunnel bandwidth 64 (kbps)
Tunnel protocol/transport GRE/IP
GRE key disabled
Checksumming of GRE packets disabled
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last clearing of counters: Never
Last 300 seconds input: 0 bytes/sec, 0 packets/sec
Last 300 seconds output: 0 bytes/sec, 0 packets/sec
0 packets input, 0 bytes
0 input error
0 packets output, 0 bytes
0 output error
Table 2 Command output
Field Descri
p
tion
Tunnel0 current state
Physical state of the tunnel interface:
• Administratively DOWN—The interface has been shut down by the
shutdown command.
• DOWN—The interface is administratively up but its physical state is
down.
• UP—Both the administrative and physical states of the interface are
up.
Line protocol current state
Link layer state of the tunnel interface:
• DOWN—The protocol state of the interface is down.
• UP—The protocol state of the interface is up.
Description Description of the tunnel interface.
Maximum Transmit Unit MTU of the tunnel interface.