HP VPN Firewall Appliances VPN Command Reference
189
[Sysname] vam client name abc
[Sysname-vam-client-name-abc] vpn 100
Related commands
• display vam client
• vam client name
DVPN tunnel configuration commands
display dvpn session
Use display dvpn session to display information about DVPN sessions.
Syntax
display dvpn session { all | interface interface-type interface-number [ private-ip ip-address ] } [ | { begin
| exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Specifies all DVPN sessions of the VAM client.
interface interface-type interface-number: Specifies the DVPN sessions of an interface. The interface type
must be tunnel.
private-ip ip-address: Specifies the DVPN session to a peer VAM client. The ip-address specifies the
private IP address of the peer VAM client.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about DVPN sessions on interface Tunnel0.
<Sysname> display dvpn session interface tunnel 0
Interface: Tunnel0 VPN name: 1 Total number: 3
Private IP: 10.0.0.21
Public IP: 28.1.1.21
Session type: Hub-Spoke
State: SUCCESS
Holding time: 0h 15m 33s
Input: 277 packets, 66 data packets, 211 control packets