HP VPN Firewall Appliances VPN Command Reference

13
Field Descri
p
tion
Internet Address
IP address of the tunnel interface.
If no IP address is assigned to the interface, this field displays Internet
protocol processing : disabled, which means that the tunnel interface
cannot process packets.
Primary indicates it is the primary IP address of the interface. Sub
indicates it is a secondary IP address of the interface.
Encapsulation is TUNNEL The encapsulation protocol is tunnel.
service-loopback-group ID
ID of the service loopback group referenced by the tunnel.
If service loopback group is not supported or not specified, this field
displays service-loopback-group ID not set.
Tunnel source Source address of the tunnel.
destination Destination address of the tunnel.
Tunnel bandwidth Bandwidth of the tunnel interface.
Tunnel protocol/transport
Tunnel mode and transport protocol:
• GRE/IP—GRE over IPv4 tunnel mode.
• GRE/IPv6—GRE over IPv6 tunnel mode.
• GRE p2mp/IP—Point-to-multipoint GRE tunnel mode.
• IPsec/IP—IPsec over IPv4 tunnel mode.
• IPsec/IPv6—IPsec over IPv6 tunnel mode.
• IP/IP—IPv4 over IPv4 tunnel mode.
• IP/IPv6—IPv4 over IPv6 tunnel mode.
• IP/IPv6 dslite-aftr—IPv4 over IPv6 DS-Lite tunnel mode on the
AFTR.
• IP/IPv6 dslite-cpe—IPv4 over IPv6 DS-Lite tunnel mode on the CPE.
• IPv6/IP—IPv6 over IPv4 manual tunnel mode.
• IPv6/IP 6to4—IPv6 over IPv4 6to4 tunnel mode.
• IPv6/IP auto-tunnel—Automatic IPv6 over IPv4 tunnel mode.
• IPv6/IP ISATAP—IPv6 over IPv4 ISATAP tunnel mode.
• IPv6/IPv6—IPv6 over IPv6 tunnel mode.
GRE key disabled Tunnel interface key option of GRE is not configured.
Checksumming of GRE packets
disabled
GRE packet checksum function is disabled.
Output queue : (Urgent queuing :
Size/Length/Discards)
Statistics of packets in the urgent output queue.
Output queue : (Protocol queuing :
Size/Length/Discards)
Statistics of packets in the protocol output queue.
Output queue : (FIFO queuing :
Size/Length/Discards)
Statistics of packets in the FIFO output queue.
Last clearing of counters Last time of clearing of counters.
Last 300 seconds input: 0 bytes/sec,
0 packets/sec
Average input rate in the last 300 seconds in bytes/sec or
packets/sec.
Last 300 seconds output: 0
bytes/sec, 0 packets/sec
Average output rate in the last 300 seconds in bytes/sec or
packets/sec.