HP VPN Firewall Appliances VPN Command Reference
21
Parameters
number: Specifies the tunnel interface number in the range of 0 to 4095.
Usage guidelines
If you want to observe new traffic statistics on a tunnel interface, you can use this command to clear old
statistics:
• If you do not specify any parameters, this command clears the statistics for all interfaces.
• If you specify only the tunnel keyword, this command clears the statistics for all tunnel interfaces.
• If you specify both the tunnel keyword and the number argument, this command clears the statistics
for the specified tunnel interface.
Examples
# Clear the statistics for the interface Tunnel 3.
<Sysname> reset counters interface tunnel 3
shutdown
Use shutdown to shut down a tunnel interface.
Use undo shutdown to bring up a tunnel interface.
Syntax
shutdown
undo shutdown
Default
A tunnel interface is in the up state.
Views
Tunnel interface view
Default command level
2: System level
Examples
# Shut down interface Tunnel 1.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] shutdown
source
Use source to specify the source address or source interface for the tunnel interface.
Use undo source to restore the default.
Syntax
source { ip-address | ipv6-address | interface-type interface-number }
undo source