HP VPN Firewall Appliances VPN Command Reference

30
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify any parameters, the command displays information about all IKE peers.
Examples
# Display information about all IKE peers.
<Sysname> display ike peer
---------------------------
IKE Peer: rtb4tunn
exchange mode: main on phase 1
pre-shared-key ******
peer id type: ip
peer ip address: 44.44.44.55
local ip address:
peer name:
nat traversal: disable
dpd: dpd1
---------------------------
Table 7 Command output
Field Descri
p
tion
exchange mode IKE negotiation mode in phase 1.
pre-shared-key Pre-shared key used in phase 1, displayed as a series of asterisks (******).
peer id type ID type used in phase 1.
peer ip address IP address of the remote security gateway.
local ip address IP address of the local security gateway.
peer name Name of the remote security gateway.
nat traversal Whether NAT traversal is enabled.
dpd Name of the peer DPD detector.
Related commands
ike peer
display ike proposal
Use display ike proposal to view the settings of all IKE proposals.