HP VPN Firewall Appliances VPN Command Reference

35
local id: 4.4.4.4
remote ip: 4.4.4.5
remote id type: IPV4_ADDR
remote id: 4.4.4.5
authentication-method: PRE-SHARED-KEY
authentication-algorithm: HASH-SHA1
encryption-algorithm: DES-CBC
life duration(sec): 86400
remaining key duration(sec): 82236
exchange-mode: MAIN
diffie-hellman group: GROUP1
nat traversal: NO
Table 10 Command output
Field Descri
p
tion
connection id Identifier of the ISAKMP SA.
vpn-instance VPN that the protected data belongs to.
transmitting entity Entity in the IKE negotiation.
status
Stateful failover status of the SA, active or standby.
This field appears only in an IPsec stateful failover scenario.
local ip IP address of the local gateway.
local id type Identifier type of the local gateway.
local id Identifier of the local gateway.
remote ip IP address of the remote gateway.
remote id type Identifier type of the remote gateway.
remote id Identifier of the remote security gateway.
authentication-method Authentication method used by the IKE proposal.
authentication-algorithm Authentication algorithm used by the IKE proposal.
encryption-algorithm Encryption algorithm used by the IKE proposal.
life duration(sec) Lifetime of the ISAKMP SA in seconds.
remaining key duration(sec) Remaining lifetime of the ISAKMP SA in seconds.
exchange-mode IKE negotiation mode in phase 1.
diffie-hellman group DH group used for key negotiation in IKE phase 1.
nat traversal Whether NAT traversal is enabled.
Related commands
• ike proposal
• ike peer