HP VPN Firewall Appliances VPN Command Reference

83
Parameters
profile-name: Specifies a name for the IPsec profile, a case-insensitive string of 1 to 15 characters that
cannot contain hyphens (-).
Usage guidelines
IPsec profiles can be applied to DVPN tunnel interfaces and IPsec tunnel interfaces.
For information about DVPN tunnel interfaces and the hardware compatibility for DVPN, see VPN
Configuration Guide.
Examples
# Create IPsec profile profile1 and enter its view.
<Sysname> system-view
[Sysname] ipsec profile profile1
[Sysname-ipsec-profile-profile1]
Related commands
• ipsec profile (tunnel interface view)
• display ipsec profile
ipsec profile (tunnel interface view)
Use ipsec profile to apply an IPsec profile to a DVPN tunnel interface or an IPsec tunnel interface.
Use undo ipsec profile to remove the application.
Syntax
ipsec profile profile-name
undo ipsec profile
Default
No IPsec profile is applied to a DVPN tunnel interface or an IPsec tunnel interface, and no IPsec
protection is provided.
Views
Tunnel interface view
Default command level
2: System level
Parameters
profile-name: Specifies the name of the IPsec profile, a case-insensitive string of 1 to 15 characters.
Usage guidelines
Only one IPsec profile can be applied to a DVPN tunnel interface or an IPsec tunnel interface. To apply
another IPsec profile to the tunnel interface, remove the original application first.
An IPsec profile cannot be applied to both a DVPN tunnel interface and an IPsec tunnel interface at the
same time.
For information about DVPN tunnel interfaces and the hardware compatibility for DVPN, see VPN
Configuration Guide.