HP VPN Firewall Appliances VPN Command Reference

90
# Clear active IPsec SAs on an IPsec stateful failover device.
<Sysname> reset ipsec sa active
Related commands
display ipsec sa
reset ipsec statistics
Use reset ipsec statistics to clear IPsec packet statistics.
Syntax
reset ipsec statistics
Views
User view
Default command level
1: Monitor level
Examples
# Clear IPsec packet statistics.
<Sysname> reset ipsec statistics
Related commands
display ipsec statistics
reverse-route
Use reverse-route to enable and configure the IPsec Reverse Route Inject (RRI) feature.
Use undo reverse-route to disable IPsec RRI.
Syntax
reverse-route [ remote-peer ip-address [ gateway | static ] | static ]
undo reverse-route
Default
IPsec RRI is disabled.
Views
IPsec policy view, IPsec policy template view
Default command level
2: System level
Parameters
static: Enables static IPsec Reverse Route Inject (RRI). Static IPsec RRI creates static routes based on the
ACL that the IPsec policy references. This keyword is available only in IPsec policy view. If this keyword
is not specified, you enable dynamic IPsec RRI, which creates static routes based on IPsec SAs.
remote-peer ip-address: Specifies a next hop for the static routes. To use the static routes for route backup
and load balancing, specify this option.