TMS zl Module Release Notes ST.1.1.100330

Software Fixes in Releases ST.1.0.090213 - ST.1.1.100330

Release ST.1.0.090213

Software Fixes in Releases

ST.1.0.090213 - ST.1.1.100330

Software fixes are listed in chronological order, oldest to newest. Unless otherwise noted, each new

release includes the software fixes added in all previous releases.

Release ST.1.0.090213 was the first production software release for the HP ProCurve Threat Manage-

ment Services zl Module.

Release ST.1.0.090213

No problems resolved in release ST.1.0.090213. (Initial Release.)

Release ST.1.0.090603

The following problems were resolved in release ST.1.0.090603

General

■ PR_6127/ PR_16218 — The output of the show run command will show an FDPoll

Returned Error message, which is not relevant to the output and inconsequential. It can

safely be ignored.

■ PR_13105 — When using the show vlans command in a CLI session established by going

through the switch interface, the VLAN information displayed is overlapped.

■ PR_15153 — When using the TMS zl Module CLI, two commands provide an insert-at

<position> extended option: access-policy and nat. There is no error checking on the position

number provided - it is assumed that a policy or rule exists at that location.

■ PR_16218 — The output of the show run command will show an FDPoll Returned Error

message, which is not relevant to the output and inconsequential. It can safely be ignored.

■ PR_16539 — When using the TMS zl Module CLI, the radius-server help command gives

options that are not available.

■ PR_16585 — An SNMP walk of the TMS zl Module MIB can go into a recursive loop when

SNMP trap receiver entries that have been created are disabled.

■ PR_16690 — When an SNMP application is utilizing the ScriptMIB, the User Group command

is failing with Invalid Input if hash mark character (#) is included in the Group Name,

even though the '#' character is valid for a Group Name.