TMS zl Module Release Notes ST.1.1.100330

Software Fixes in Releases ST.1.0.090213 - ST.1.1.100330

Release ST.1.0.090603

■ PR_17313 — For a VLAN association, the user can specify DHCP as a method for getting

an IP address for the TMS zl Module. If the user goes in and edits the VLAN association and

changes the IP address method to a Static IP address, the DHCP client process still runs in

the background and can overwrite the static IP address.

■ PR_18770 — It was possible that a management denial of service would happen with the

TMS zl Module if the httpd stopped or crashed. Now the httpd is added to a monitoring

watchdog service that will automatically restart the httpd if it stops.

■ PR_19098 — TMS zl Module was not showing any log entries that were generated due to

multicast traffic.

■ PR_38256 — Using the Web browser interface, disabling PIM on a VLAN did not also disable

IGMP on the VLAN.

■ PR_38257 — On the HA configuration page in the Web browser interface, if you change the

Multicast IP and then refresh the HA page, you lose your changes. You must save and reboot

for the changes to take effect.

■ PR_39059 — Time zone specification in show time was inconsistent between the switch and

TMS zl Module. Changed the TMS zl Module to match the switch's method of displaying time

to avoid confusion.

■ PR_39493 — When editing a routing protocol that has authentication set, if the

authentication value is not provided, an error message is displayed. However, the changes

that were made during an edit were still accepted, even though an error message was

displayed.

■ PR_40662 — Log entries with the following message identifiers: 630, 631, 632, and 633 are

marked as critical when they are not considered critical messages. They should be a warning.

These messages occurred during port scan related activities and have been disabled at the

present time.

■ PR_40780 — In the command line interface (CLI), the wrong number for the total number

of connections in all zones is displayed in the connection-settings help text. The command is:

(tms-module-<slot-ID>:config)#connection-settings help

The output of this command would show 500000 instead of the correct value of 600000.

Firewall

■ PR_11023 — Log messages tracking the login and logout of authenticated users are not

generated by the firewall.

■ PR_37837 — Log messages with message IDs of 657 and 625 are logged as critical when

they should not be critical.