TMS zl Module Release Notes ST.1.1.100330

Software Fixes in Releases ST.1.0.090213 - ST.1.1.100330

Release ST.1.1.100226

The following problems were resolved in release ST.1.1.100226

General

■ PR_813 — Web browser interface does not function without JavaScript enabled and does

not notify user that JavaScript is required.

■ PR_961 — The initial login banner text of the Web browser interface in the TMS zl Module

differs in size depending on whether the user is accessing it with HTTP or HTTPS. While

noticeable, this difference in size does not impair functionality.

■ PR_1057 — In the command line interface (CLI), for OSPF routing, the ability to specify a

Virtual Link between an area and a neighbor was added.

■ PR_1143 — The options for VLAN IPv4 functionality change depending on how a command

is accessed. For example, vlan <id> ip options are different than going into the VLAN context

via vlan <id> and then typing ip.

■ PR_3198 — In the CLI, the show vlans command now displays the VLAN name.

■ PR_3968 — To always ensure management access, a watchdog process was added to restart

management services that may be in an error state and preventing management access.

■ PR_4155 — Port Status displays 10 Megabit speed for Ethernet ports in SNMP-MIB. The

speed should be 10 Gigabit.

■ PR_5104 — Email logging now allows for an anonymous user.

■ PR_5390 — The administrator cannot change the password for MD5 authentication on an

OSPF interface without knowing the previous password.

■ PR_5444 / PR_5446 / PR_5718 — In the CLI, the ability to search the log was significantly

enhanced.

ProCurve Switch 5406zl(tms-module-C)# show logging local filter ?

id Filter by log message ID.

search Search for a specified substring in log entries.

sip Display messages with this source IP address.

dip Display messages with this destination IP address.

date-time Filter by log date-time.

severity Filter by log severity.

■ PR_5847 — In the Web browser interface, the number of entries setting in the View Log page

will always flip back to 50 when you refresh the browser.

■ PR_8428 — Multicast routing is enabled after adding or editing multicast on a VLAN and

refreshing the screen.