TMS zl Module Release Notes ST.1.1.100330

26
Known Issues
Release ST.1.1.100226
Known Issues
Known issues fixed in a later software release are indicated using the following format:
■ PR_xxxxxxxxxx —
To confirm what release fixed the issue, use the issue number to search the PDF file.
Known issues that are open as of the latest software release appear as follows:
■ PR_xxxxxxxxxx —
Release ST.1.1.100226
The following problems are known issues as of release ST.1.1.100226.
General
■ PR_9285 / PR_9286 — For RIP, there are some minor issues when interoperating between
RIP version 1 and RIP version 2 on the switch. As a general recommendation when using a
TMS zl Module, always standardize on RIP version 1 or RIP version 2, with RIP version 2
preferred.
■ PR_12609 — Web browser interface consistency and text clarification edits.
■ PR_16221 — In the Web browser interface after a successful software update, the success
Log message is lost after rebooting the blade. Steps:
1. Make software update using any server (for example, tftp).
2. After the image has been installed, go to logging>view log page.
3. Use the filter to see the log message (for example, Severity Major).
4. See the logging message Image completed successfully for host .... is
displayed.
5. Reboot the blade.
The Image completed successfully for host .... log is deleted after rebooting the
blade.
■ PR_17703 — In the Web browser interface, the logs may pick up the wrong time zone from
the chassis.
■ PR_18482 — Inconsistent treatment of password fields in Web browser interface.