TMS zl Module Release Notes ST.1.1.100330

28
Known Issues
Release ST.1.1.100226
■ PR_44372 — Inconsistency between the TMS zl Module and 5400/8200 zl switches on OSPF
Priority range. The switch OSPF Priority range is 0-255 and on the TMS zl Module it is 1-255.
■ PR_44476 — TMS zl Module does not log all administrative changes to the configuration.
As a result, the log files do not show all the necessary information to audit configuration
changes appropriately. For example, modifying an access policy does not produce a log entry.
■ PR_44556 — When a RADIUS server is accessed for user login requests, the RADIUS servers
will be tried in a round robin order.
■ PR_44658 — In the TMS zl Module CLI, the readability of the show run output could be
improved with better blank line spacing.
■ PR_44674 — In the CLI, show run, show sys and show tech display chassis as chasis.
■ PR_44788 — When trying to add an IP route via the CLI, an error is shown without any error
message. This situation happens when there are two CLI sessions and when one CLI session
does a show ip route, and then the other CLI session tries to add a route.
ProCurve Switch 5406zl(tms-module-C)# ip route 192.168.3.27 255.255.255.255
10.10.10.254
Error:
■ PR_44877 — In the TMS zl Module Web browser interface, the Networking -> Routing -> Static
Routes tab sorts the table as follows:
10.1.1.0/24
10.1.10.0/24
10.1.11.0/24
10.1.2.0/24
10.1.3.0/24
The Networking -> Routing -> View Routes table is sorted correctly:
10.1.1.0/24
10.1.2.0/24
10.1.3.0/24
10.1.10.0/24
10.1.11.0/24
■ PR_44968 — Performance Related IPS issue - scheduled to be addressed in May-June 2010
release. Should not affect users with < 75% CPU utilization.
■ PR_45634 — An incorrect IP address is accepted in the destination field when editing a
multicast policy. Steps: