TMS zl Module Release Notes ST.1.1.100330

29
Known Issues
Release ST.1.1.100226
1. Go to Firewall/Access policies/Multicast
2. Click on Add a policy
3. On the source field, go to Options button and select Enter custom IP,IP/mask or IP-Range and
enter a non-multicast IP address.
4. On the destination field, go to Options button and select Enter custom IP,IP/mask or IP-Range
and enter a multicast IP address.
5. Before you click on Apply button and Close button, make sure you make a note of what zones
you picked for the policy.
6. Click on Apply button.
7. Pick the previously created policy and click on the edit icon.
8. In the destination field, specify a Unicast IP address.
Unicast IP address in the destination field should cause an error message. Instead, no error
message is displayed and the incorrect IP address is accepted.
PR_45671 — In the Web browser interface, Firewall->Access Policies->Addresses, duplicate
Network (IP/mask) entries can be added for a given name. For instance, 10.10.10.0/24,
10.10.20.0/24, 10.10.10.0/24 could be added under a given name.
PR_45757 — The spinning icon in the bottom left hand corner of the Firewall - Schedule
dialog does not show when adding/editing a schedule.
PR_45970 — When the TMS zl Module is updated, the version information available on the
Service OS is not updated and displays the Product OS version which was originally installed.
PR_49198 — In the Web browser interface under System->Logging, the View Log tab has
misaligned fields when using Internet Explorer 8.
PR_ 49883 — Performance Related ALG issue - scheduled to be addressed in May-June 2010
release. Should not affect users with < 75% CPU utilization.
PR_ 49885 — Performance Related HA issue - scheduled to be addressed in May-June 2010
release. Should not affect users with < 75% CPU utilization.
PR_49892 — Performance Related HA issue - scheduled to be addressed in May-June 2010
release. Should not affect users with < 75% CPU utilization.
PR_49894 — TMS zl Module Web browser interface performance Related HA + IPS issue -
scheduled to be addressed in May-June 2010 release. Should not affect users with < 75% CPU
utilization.
PR_50035 — Performance Related Maximum Configured Access Policies issue - scheduled
to be addressed in May-June 2010 release. Should not affect users with < 75% CPU utilization.