TMS zl Module Release Notes ST.1.1.100330

44
Known Issues
Release ST.1.0.090603
After the TMS zl Module has been updated to ST.1.0.090603, the following behavior is observed:
The output of the switch CLI command, show services <slot-ID> detail reports the software version
initially installed rather than the updated version. The output of the TMS zl Module CLI command,
show version, is correct. Additionally, the software version information in the TMS zl Module's Web
browser interface correctly identifies the updated version, ST.1.0.090603, as the current version.
General
■ PR_38053 — Unnecessary log information is displayed when an invalid user tries to login
via SSH.
1. Open the TMS zl Module Web browser interface.
2. Go to the logging section.
3. Select the View Log tab.
4. Open a tool that allows to connect via SSH to the TMS zl Module.
5. Try to login to the TMS with an invalid user.
6. The following log entries are displayed:
time="2009-03-20 17:14:30" severity=warning pri=4
fw=ProCurve-TMS-zl-Module id=ssh msg="Failed password for invalid
user one from 192.168.8.103 port 16123 ssh2"
time="2009-03-20 17:14:24" severity=info pri=6
fw=ProCurve-TMS-zl-Module id=ssh msg="Failed none for invalid user
one from 192.168.8.103 port 16123 ssh2"
time="2009-03-20 17:14:24" severity=info pri=6
fw=ProCurve-TMS-zl-Module id=ssh msg="Invalid user one from
192.168.8.103"
Only the last log entry should be generated.