TMS zl Module Release Notes ST.1.1.100330

Known Issues

Release ST.1.0.090603

■ PR_38705 — RIP: Connected VLANs are not sent correctly when Ripv1-v2 is set. The TMS

zl Module does not send the connected VLANs to another router (R1), when RIP version has

been set as v1-v2.

In the following example the TMS zl Module is using Ripv1-v2 and router R1 has RIP version 2 set.

Routes in TMS zl Module

Routes in R1 when VLAN300 has v2 enabled in TMS zl Module

Destination Gateway Metric Distance VLAN Type

10.10.30.0/24 10.10.30.254 1 0 lan30 connected

10.10.40.0/24 10.10.40.254 1 0 vlan40 connected

192.168.1.0/24 192.168.1.254 1 0 vlan100 connected

192.168.2.0/24 192.168.3.250 3 100 vlan300 rip

192.168.3.0/24 192.168.3.254 1 0 vlan300 connected

192.168.5.0/24 192.168.1.253 2 110 vlan100 ospf

192.168.11.0/24 192.168.11.96 1 0 vlan1 connected

Destination Gateway Metric Distance VLAN Type

10.10.30.0/24 192.168.3.254 3 100 vlan300 rip

10.10.40.0/24 192.168.3.254 3 100 vlan300 rip

192.168.1.0/24 192.168.3.254 3 100 vlan300 rip

192.168.2.0/24 192.168.2.250 1 0 vlan200 connected

192.168.3.0/24 192.168.3.250 1 0 vlan300 connected

192.168.5.0/24 192.168.3.254 3 100 vlan300 rip

192.168.11.0/24 192.168.11.95 1 0 vlan1 connected