TMS zl Module Release Notes ST.1.1.100330

47
Known Issues
Release ST.1.0.090603
Routes in R1 when VLAN300 has v1-v2 enabled in TMS zl Module
As a workaround, use RIP version 2 in the TMS zl Module.
■ PR_38775 — Using the Command Line Interface, there is no mechanism to disable PIM
globally. The Web browser interface must be used instead.
■ PR_38776 — Using the Command Line Interface, the rp-address command is not listed in
the PIM context. As a result, if you have a static RP, the RP can't be deleted in PIM context.
Example:
1. Open a CLI session.
2. Go into PIM context.
<config>#router pim
3. Press the tab key.
end Return to the Manager Exec context.
exit Return to the previous context or terminate session.
logout Terminate current session.
show Display TMS device operation information.
The rp-address should be listed in PIM context.
■ PR_38778 — Learned RP are deleted when setting a static RP from the TMS module.
Example:
1. Open CLI session
2. Verify the learned RP
#show ip pim rp-set
Status and Counters - PIM-SM Static RP-Set Information
Group Address Group Mask RP Address
[empty]
Destination Gateway Metric Distance VLAN Type
192.168.1.0/24 192.168.3.254 3 100 vlan300 rip
192.168.2.0/24 192.168.2.250 1 0 vlan200 connected
192.168.3.0/24 192.168.3.250 1 0 vlan300 connected
192.168.5.0/24 192.168.3.254 3 100 vlan300 rip
192.168.11.0/24 192.168.11.95 1 0 vlan1 connected