TMS zl Module Release Notes ST.1.1.100330

Known Issues

Release ST.1.0.090603

VPN

■ PR_40354 — When 4893 Internet Key Exchange Security Associations are established, no

more IKE responses are generated by the TMS zl Module and no logs reporting this condition

are generated.

■ PR_40903 — When an L2TP Policy exists and is disabled, traffic continues passing through

the tunnel. The L2TP Policy must be deleted.

Example:

1. Go to VPN -> IPsec -> L2TP Remote Access.

2. Add an L2TP Policy.

3. Create access policies.

4. Verify that the traffic gets through the tunnel.

5. Edit the L2TP Policy, uncheck the Enable this policy check box.

Traffic gets through the tunnel.

High Availability (HA)

■ PR_38143 — A better description should be added to the log message when the Participant

leaves the Active-Standby configuration. The current message is as follows:

19:11:44" severity=info pri=6 fw=POSTMR id=hacl_vsrp msg="Detected device

down" proto=VRRP masterid=2 vsrpstate="MASTER" clusterstatus="Disabled"

mgmt_ipaddress="10.10.10.200" vsrpid=4 hastatus="Enabled"

devicerole="MASTER" deviceid=2 subfamid=vsrpsubfamily mtype=vsrp mid=22076

■ PR_38921 — In the High Availability Active-Standby mode, saving and synchronizing in

Internet Explorer 7 from the signature page will result in a Slow Script dialog being displayed.

Example:

Preconditions:

•IE7 browser

•IPS signatures have been downloaded

•HA A/S has been enabled

1. Go to IPS>Signatures>View page and wait until signatures are loaded.

2. Save the configuration and select Yes in the Confirm window. The warning message Stop

running this script? is displayed and the Participant does not synchronize.

As a workaround, synchronize the Participant from another location in the Web Interface.