TMS zl Module Release Notes ST.1.1.100330

Known Issues

Release ST.1.0.090213

The following problems are known issues as of release ST.1.0.090213.

■ PR_665 — When an IPv4 address is entered into a field, regardless of whether the

administrator is using the Web browser interface or CLI interface, the TMS zl Module is not

doing the complete validation on the address based upon the field being used. For example,

a multicast or broadcast address can be entered into source address fields. It is up to the

user to ensure the correctness of the address for the field in question.

Related PRs:

PR_665

PR_1794

PR_2068

PR_2252

PR_2253

PR_2254

PR_2424

PR_2613

PR_3824

■ PR_906 — When the Web browser interface of the TMS zl Module is left at the login screen

without the user logging into the TMS zl Module, the inactivity timer still applies, resulting

in the user having to go back to the login screen manually. The inactivity timer should only

apply once a user has logged in, but instead applies at all times.

■ PR_961 — The initial login banner text of the Web browser interface in the TMS zl Module

differs in size depending on whether the user is accessing it with HTTP or HTTPS. While

noticeable, this difference in size does not impair functionality.

■ PR_1044 — From the TMS zl Module CLI, when a TMS zl Module is operating in Routing

Mode using OSPF, the command show ip ospf neighbor has an output that is not the same as

a ProCurve switch that is running OSPF. Important information about OSPF neighbors is still

shown, how the information that is shown is different from the switch.

■ PR_1143 — The options for VLAN IPv4 functionality change depending on how a command

is accessed. For example, vlan <id> ip options are different than going into the VLAN context

via vlan <id> and then typing ip.

Example:

ProCurve Switch(tms-module-D:config)# vlan 20 ip

address Set IP parameters for communication within an IP network.

igmp Enable IGMP on the VLAN.

pim-sparse Enable PIM-SM on the device.

ProCurve Switch(tms-module-D:config)# vlan 20

ProCurve Switch(tms-module-D:vlan-20)# ip