TMS zl Module Release Notes ST.1.1.100330

4
Software Management
Software Updates
3. Enter the ProductOS context for the TMS zl Module.
Syntax: services <
slot ID > name tms-module
Replace <
slot ID > with the letter for the chassis slot in which the module is
installed.
Example: hostswitch# services c name tms-module
OR
Syntax: services < slot ID > < product index >
Replace <
slot ID > with the letter for the chassis slot in which the module is
installed.
Replace <
product index > with the index number that your particular switch has
assigned the TMS zl Module.
Example: hostswitch# services c 2
4. Copy the image from the server and install.
5. Reboot the module to complete the update.
hostswitch(tms-module-C)# reboot
For example, suppose that you copied the image to an FTP server that has the parameters shown
below:
• IP address — 192.168.1.13
• Username — PROCURVEU\IUSR_CA
• Password — procurve
• Filename — ST.1.1.100330.zip (copied to the root directory)
1. You would type the following:
hostswitch(tms-module-C)# copy ftp image 192.168.1.13 ST.1.1.100330.zip user
PROCURVEU\IUSR_CA
2. After you press Enter, the module prompts you for the password.
Password: procurve
3. The image is copied to the module, then automatically installed.
4. When the prompt says that the installation is finished, reboot the module to complete the update.
hostswitch(tms-module-C)# reboot
Using a TFTP Server.
1. Transfer the compressed image onto a TFTP server.