Wireless Edge Services xl Module Release Notes WS.02.27
Table Of Contents
- Release Notes: Version WS.02.27 Software for the ProCurve Wireless Edge Services xl Module (J9001A) and the ProCurve Redundant Wireless Services xl Module (J9003A)
- Copyright and Disclaimers
- Contents
- Software Management
- Support Notes
- Release WS.02.07
- Reconfigure Management Passwords After a Software Update from Version WS.01.xx to Version WS.02.xx
- Accessing the Web Browser Interface After a Software Update from Version WS.01.xx to Version WS.02.xx
- Configuring Authentication for Web-Users
- Special Characters for the ACL ID Field
- Correction: SNMP v3 Default Password
- Correction: Stations per Radio
- Correction: Stations per Module in a Layer 3 Mobility Domain
- Correction: Disabling TKIP Countermeasures
- Clarification: Setting Intrusion Detection with TKIP Countermeasures
- Release WS.02.07
- Enhancements
- Software Fixes
- Known Software Issues and Limitations
- Back Cover
21
Enhancements
Release WS.02.26 Enhancements
Release WS.02.26 Enhancements
Support for Client Location Confidence in ProCurve Mobility Manager
To support the client location confidence feature in ProCurve Mobility Manager 2.0 Automatic
Update 1 (AU1), the logging of client probe requests (a “Probe List”) can be enabled through the
switch’s Command Line Interface (CLI).
To enable logging of client probe requests, use the station probe-history enable command from the
wireless configuration context. For example:
ProCurve<wireless-services-A><config-wireless># station probe-history enable
where the WESM xl is installed in slot A of the switch in this example.