Wireless Edge Services xl Module Release Notes WS.02.27
Table Of Contents
- Release Notes: Version WS.02.27 Software for the ProCurve Wireless Edge Services xl Module (J9001A) and the ProCurve Redundant Wireless Services xl Module (J9003A)
- Copyright and Disclaimers
- Contents
- Software Management
- Support Notes
- Release WS.02.07
- Reconfigure Management Passwords After a Software Update from Version WS.01.xx to Version WS.02.xx
- Accessing the Web Browser Interface After a Software Update from Version WS.01.xx to Version WS.02.xx
- Configuring Authentication for Web-Users
- Special Characters for the ACL ID Field
- Correction: SNMP v3 Default Password
- Correction: Stations per Radio
- Correction: Stations per Module in a Layer 3 Mobility Domain
- Correction: Disabling TKIP Countermeasures
- Clarification: Setting Intrusion Detection with TKIP Countermeasures
- Release WS.02.07
- Enhancements
- Software Fixes
- Known Software Issues and Limitations
- Back Cover
22
Software Fixes
Release WS.01.05
Software Fixes
Release WS.01.03 was the first software release for the ProCurve Wireless Edge Services xl Module
(J9001A) and the ProCurve Redundant Wireless Services xl Module (J9003A).
To review the list of fixes since the last general release published, begin with “Release WS.02.14” on
page 28.
Release WS.01.05
Problems Resolved in Release WS.01.05
■ Infrastructure (27200) — Interface's MTU size was not saved in the running config. Now
saved correctly.
■ Infrastructure (28463) — The running-config file includes a time stamp, which makes it
appear that the file has changed between fetches. The time stamp has been removed.
■ Security (27441) — Fixed support for full-size RADIUS packets, and ones that may contain
100 attributes.
■ SNMP (27403) — SNMP get fails for an instance of
hpicfWsmWsInfraFileMgmtImageVersion after reboot until a walk or getNext is done
on table entries. Now operates properly.
■ Wireless (27165) — Password encryption secret configuration issue. Unable to configure
802.11i key with password-encryption secret or specified UNENCRYPTED password. Now
operates properly.
■ Wireless (27199) — Added support for CHAP as an optional authentication type for Web-
auth. This is configured via the CLI only.
■ Wireless (27438) — Thirteenth RP needs to be seen in unadopted list. Now operates
properly.
■ Wireless (27439) — Attribute (Calling-Station-Id) was missing for Web-auth, causing
interoperability problems with IDM server. This has been fixed.
■ Wireless (27443) — Framed-MTU and Connect-Info in RADIUS request packet for Web-
auth and 802.1X were missing. They have been added.
■ Wireless (27214) — Web-Auth/IDM did not work if there were more than four ACLs or if
the RADIUS packet length was more than 250. This has been fixed.
■ Wireless (27437) — Web-auth redirection did not always work.