Wireless Edge Services xl Module Release Notes WS.02.27
Table Of Contents
- Release Notes: Version WS.02.27 Software for the ProCurve Wireless Edge Services xl Module (J9001A) and the ProCurve Redundant Wireless Services xl Module (J9003A)
- Copyright and Disclaimers
- Contents
- Software Management
- Support Notes
- Release WS.02.07
- Reconfigure Management Passwords After a Software Update from Version WS.01.xx to Version WS.02.xx
- Accessing the Web Browser Interface After a Software Update from Version WS.01.xx to Version WS.02.xx
- Configuring Authentication for Web-Users
- Special Characters for the ACL ID Field
- Correction: SNMP v3 Default Password
- Correction: Stations per Radio
- Correction: Stations per Module in a Layer 3 Mobility Domain
- Correction: Disabling TKIP Countermeasures
- Clarification: Setting Intrusion Detection with TKIP Countermeasures
- Release WS.02.07
- Enhancements
- Software Fixes
- Known Software Issues and Limitations
- Back Cover
25
Software Fixes
Release WS.02.11
■ Applet (40701) — The Web Management Interface becomes unresponsive if the user
refreshes the alarm log more than 5 times when there are over 500 alarms present.
■ Applet (40908) — The Web Management Interface login page is displayed (and should not
be) even when SNMPv3 is disabled. Then, although login attempts are unsuccessful as
intended by the design, the error message, “You supplied an invalid username/
password pair” is inaccurate, and the syslog message inaccurately reports authentication
success.
■ Applet (40538) — Some valid combinations of IP address and subnet mask produce a
misleading error message.
■ Applet (40593) — The Trustpoint for certificate configuration gets deleted when the Back
button is selected from the later configuration screens.
■ Applet (40871) — When adding a MAC Extended ACL rule, the Ethertype pulldown menu
should be enabled or disabled according to whether the Ethertype checkbox is populated,
rather than always being enabled.
■ Applet (40940) — Repeatedly refreshing the ACL statistics in the Web Management
Interface will occasionally reveal a blank screen.
■ Applet (41044) — The percentage of Undecryptable Packets is showing an invalid value
of 100% or more in the WLAN and Radio statistics areas, though it is displaying appropriate
values in the wireless statistics detail popup.
■ Applet (41308) — The ACL statistics screen shows invalid protocol values and invalid rows.
■ Applet (41337) — A java.lang.NULL pointer exception may occur during configuration of
a DHCP pool in the Web Management Interface.
■ Applet (41338) — When DHCP relay is already enabled on a VLAN, and a DCHP scope is
added for that same VLAN, an error should occur on the bottom left corner of the Web
Management Interface warning the user of the conflicting DHCP strategies.
■ Applet (41486) — If the administrator of the Web Management Interface tries to modify
ACE rule precedence by using the rule precedence of an different ACE within the same ACL,
one of the access control entries will be deleted.
■ Applet (42562) — A duplicate CA certificate for the same trustpoint entry may be displayed
by the Web Management Interface.
■ Applet (41468) — The radio statistics page in the Web Management Interface may display
a larger value for "last 30s" than for "last hr".
■ Applet (41323) — After enabling DHCP Relay and committing to the change, the Cancel
button still appears but does not function.