Wireless Edge Services xl Module Release Notes WS.02.27
Table Of Contents
- Release Notes: Version WS.02.27 Software for the ProCurve Wireless Edge Services xl Module (J9001A) and the ProCurve Redundant Wireless Services xl Module (J9003A)
- Copyright and Disclaimers
- Contents
- Software Management
- Support Notes
- Release WS.02.07
- Reconfigure Management Passwords After a Software Update from Version WS.01.xx to Version WS.02.xx
- Accessing the Web Browser Interface After a Software Update from Version WS.01.xx to Version WS.02.xx
- Configuring Authentication for Web-Users
- Special Characters for the ACL ID Field
- Correction: SNMP v3 Default Password
- Correction: Stations per Radio
- Correction: Stations per Module in a Layer 3 Mobility Domain
- Correction: Disabling TKIP Countermeasures
- Clarification: Setting Intrusion Detection with TKIP Countermeasures
- Release WS.02.07
- Enhancements
- Software Fixes
- Known Software Issues and Limitations
- Back Cover
26
Software Fixes
Release WS.02.11
■ Applet (42565) — The Web Management Interface does not allow changes to the GRE
tunnel interface IP address.
■ Chassis (40486) — The running configuration on the module is not erased as it should be
when the startup configuration of the chassis is erased and the host switch is reloaded.
■ CLI (41567) — The CLI fails to display buffered log messages when debug is enabled.
■ ESPD (41183) — When an invalid file name is used for the configuration file in the update
server, the result is an oddly corrupted configuration.
■ Infrastructure (40782) — After setting up the update server parameters and reloading,
the module loses its IP address and local RADIUS settings.
■ Infrastructure (40840) — Disabling and re-enabling SNMPv3 support or enabling the
Secure Management VLAN may cause the module to hang.
■ Infrastructure (41391) — Valid login password credentials for the Web Management
Interface do not successfully allow authentication on the second attempt after a security
scan.
■ Infrastructure (41384) — The update server functionality continues to pull the
redundancy-config file even when the unreachable flag is set.
■ Infrastructure (41257) — A Logd core file is produced after enabling "debug all" messages
in the CLI.
■ Infrastructure (42759) — The module may reboot with a Kernel Panic ("missing device")
when iPerf tests are run against it.
■ Infrastructure (44596) — Presence of a carriage return in the Web Auth configs page
corrupts the configuration. This fix strips out the carriage return character and adds some
text to the Web Management Interface to encourage the use of a carriage return alternative
in the configuration.
■ Infrastructure (43038) — Redundancy peers toggle offline and then back online when a
show running configuration command is executed.
■ L2-L3 (41339) — There is intermittent log message accuracy when there are multiple
VLANs with different DHCP strategies in place (some with DHCP relay and others with DHCP
server scopes).
■ L2-L3 (40237) — An FTP transfer is erroneously allowed between devices in different
VLANs in the absence of routing.
■ L2-L3 (41385) — A DHCP server core file may be produced during normal operation.