Wireless Edge Services xl Module Release Notes WS.02.27
Table Of Contents
- Release Notes: Version WS.02.27 Software for the ProCurve Wireless Edge Services xl Module (J9001A) and the ProCurve Redundant Wireless Services xl Module (J9003A)
- Copyright and Disclaimers
- Contents
- Software Management
- Support Notes
- Release WS.02.07
- Reconfigure Management Passwords After a Software Update from Version WS.01.xx to Version WS.02.xx
- Accessing the Web Browser Interface After a Software Update from Version WS.01.xx to Version WS.02.xx
- Configuring Authentication for Web-Users
- Special Characters for the ACL ID Field
- Correction: SNMP v3 Default Password
- Correction: Stations per Radio
- Correction: Stations per Module in a Layer 3 Mobility Domain
- Correction: Disabling TKIP Countermeasures
- Clarification: Setting Intrusion Detection with TKIP Countermeasures
- Release WS.02.07
- Enhancements
- Software Fixes
- Known Software Issues and Limitations
- Back Cover
31
Known Software Issues and Limitations
Release WS.01.05
Known Software Issues and Limitations
This section identifies issues you may encounter when using a ProCurve Wireless Edge Services xl
Module (J9001A) or a ProCurve Redundant Wireless Services xl Module (J9003A).
To review the most recent list of issues and limitations since the last general release published, begin
with “Release WS.02.11” on page 34 and “Release WS.02.12” on page 34.
Release WS.01.05
■ In the Web browser interface, radio information is missing in the Wireless Statistics Screen.
MAC Address, Throughput, Bit Speed (Avg.), % Non Unicast, and Retries fields are displayed as
blank for radio index 2 (27289).
Release WS.01.11
■ Applet (27436) — In the Wireless Statistics page, sort by Radio Index and sort by Bit Speed
(Avg.) Mbps do not work.
■ CLI (27202) — The redundancy hold-period is incorrectly shown as the redundancy holdtime-
period in the configuration file.
■ Security (41136) — MAC filters are not retained across a reboot
■ Wireless (27199) — Support for CHAP as an optional authentication type for Web-
authentication is configurable only using the CLI.
■ Wireless (37490) — Crash of the redirected daemon is causing Web-authentication to stop
working.
Release WS.02.07
■ Applet — If the network administrator configures a self-signed certificate with a space in
the trustpoint name, the configuration will be allowed, but the local RADIUS services will
then fail.
■ Applet (35919) — There is no way to edit the radius clients and proxy servers. The
workaround is to delete and reconfigure them.
■ Applet (40444) — Web management allows the edit of an attached ACL which does not
exist; this invalid action will result in a "communication error" which does not provide
information about why the action failed.