Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater
Table Of Contents
- ProCurve Wireless Edge Services xl Module and ProCurve Redundant Wireless Services xl Module
- Title Page
- Copyright and Disclaimer Notices
- Table of Contents
- 1. Introduction
- Contents
- ProCurve Wireless Edge Services xl Module
- Wireless Networks and WLANs
- The Interface Between the Wireless and Wired Networks
- Layer 2 and Layer 3 Operation
- Determining the Layer 3 Services Your Wireless Edge Services xl Module Should Provide
- IP Routing
- DHCP Services
- Security Features
- Traffic Management and QoS
- Management Capabilities and sFlow
- RP Licensing
- Radio Ports
- Redundancy Groups
- Layer 2 and Layer 3 Roaming Between RPs and Modules
- 2. Configuring the ProCurve Wireless Edge Services xl Module
- Contents
- Management Interfaces
- Radio Port Adoption
- System Maintenance
- Software Images
- Configuration Files
- Viewing Configuration Files
- Transferring, or Copying, Files
- Transferring Configuration Files from an FTP or TFTP Server to the Wireless Edge Services xl Module
- Transferring Configuration Files from the Wireless Edge Services xl Module to Another Destination
- Managing the Directory Structure and Browsing for Files
- Deleting a Configuration File
- Returning the Startup-Config File to Factory Default Settings
- Update Server
- Password Encryption
- SNMP Traps and Error Reporting
- Radio Port Licenses
- Setting System Information-Name, Time, and Country Code
- Enabling Secure Network Time Protocol (NTP)
- Digital Certificates
- 3. Radio Port Configuration
- 4. Wireless Local Area Networks (WLANs)
- Contents
- Overview
- Configuration Options: Normal Versus Advanced Mode
- Configuring a WLAN
- VLAN Assignment
- Traffic Management (QoS)
- 5. Web Authentication for Mobile Users
- 6. IP Services-IP Settings, DHCP, and DNS
- 7. Access Control Lists (ACLs)
- 8. Configuring Network Address Translation (NAT)
- 9. Fast Layer 2 Roaming and Layer 3 Mobility
- 10. Redundancy Groups
- Contents
- High Availability for Wireless Services
- Configuring a Redundancy Group
- Configuring Redundancy Group Settings
- Adding Members to the Redundancy Group
- Enabling Redundancy
- Viewing Information about the Redundancy Group
- Viewing Information about the Other Members of the Redundancy Group
- Setting up Adoption Preference IDs to Control RP Adoption
- Reverting RPs Adopted by a Standby Member to the Active Member
- 11. RADIUS Server
- Contents
- Overview
- RADIUS Authentication
- Configuring the Internal RADIUS Server
- Choosing the Authentication Type for 802.1X/EAP
- Specifying the RADIUS Server’s Digital Certificate
- Choosing the Source for User Credentials
- Configuring the Local RADIUS Database
- Using LDAP for the Data Source
- Specifying a Domain Proxy RADIUS Server
- Specifying Global RADIUS Settings
- Adding RADIUS Clients
- Starting and Stopping the RADIUS Server
- Enabling Authentication to the Internal Server on a WLAN
- Configuring the Internal RADIUS Server
- RADIUS Accounting
- 12. Configuring Tunnels with Generic Routing Encapsulation
- 13. Wireless Network Management
- Contents
- Overview
- Monitoring the Wireless Network
- AP Detection
- Configuring Station Intrusion Detection
- Logging and Alarms
- MAC Filters (Local MAC Authentication)
- Network Self Healing
- 14. sFlow Agent
- Appendix A - ProCurve Wireless Services xl Module Command Line Reference
- Contents
- Overview
- Manager Commands
- Global Commands
- Interface Commands
- Wireless Commands
- Show Commands
- Show Commands (All Contexts)
- show alarm-log
- show commands
- show crypto
- show debug
- show file
- show flash
- show history
- show hostname
- show interfaces
- show ip
- show licenses
- show logging
- show management
- show password-encryption
- show redundancy-group
- show redundancy-history
- show redundancy-member
- show running-config
- show snmp
- show sntp
- show startup-config
- show terminal
- show time
- show timezone
- show upd-server
- show upgrade-status
- show version
- show vlans
- Show Commands (Wireless)
- show wireless ap-detection-config
- show wireless approved-aps
- show wireless channel-power
- show wireless config
- show wireless ids
- show wireless mac-auth-local entries
- show wireless phrase-to-key
- show wireless radio-config
- show wireless radio-statistics
- show wireless radio-status
- show wireless regulatory
- show wireless rp-images
- show wireless rp-status
- show wireless rp-unadopted
- show wireless self-heal-config
- show wireless station
- show wireless station-statistics
- show wireless unapproved-aps
- show wireless web-auth-config
- show wireless wireless-module-statistics
- show wireless wlan-config
- show wireless wlan-statistics
- Support Commands
- Support Commands (All Contexts)
- Support Commands (Wireless)
- Index
- Back Cover
Index – 5
domain name system
See DNS
domain proxy RADIUS server
settings for … 11-30
specifying … 11-27
downlink port … 1-7, 1-8
DTIM period
defined … 3-23
different value for each BSSID … 3-34
specifying for specific radio … 3-33
specifying in radio adoption defaults … 3-23
dynamic DNS … 6-40
client update … 6-42
server update … 6-42
Dynamic Frequency Selection … 1-54
Dynamic host configuration protocol
See DHCP pool
See DHCP relay
See DHCP requests
See DHCP server
dynamic index (radio) … 1-66, 3-30
dynamic NAT
configuring … 8-24
overview and uses … 8-5
dynamic or user-based
authentication required … 4-88
dynamic VLAN assignment
authentication required … 4-88
considerations for … 4-88
enabling … 4-88
local group policies, in … 11-26
overview … 1-35
prohibited … 4-33
E
EAP … 1-25
EAP start frame attack … 13-57
encryption
passwords and roaming … 2-106
passwords in config … 2-105
See also WEP
See also WPA/WPA2
WLAN
configuring … 4-48
options for … 1-31
error reporting … 2-108
ESS … 1-57
extended DHCP option
adding to pool … 6-38
defining … 6-36
excluded codes … 6-37
excluded names … 6-37
overview … 6-36
extended IP ACL
defined … 7-3
destination IP filter … 7-22
ICMP filter … 7-19
protocol filter … 7-19
source address filter … 7-22
TCP/UDP port filter … 7-21
extended service set identifier … 1-57
external antenna
mode for … 3-18
self healing offset and … 3-24
F
failover
standby mode … 1-77
fast Layer 2 roaming
enabling … 4-59, 9-11
overview … 9-3
pre-authentication … 9-3
files
browsing file systems … 2-34, 2-94
configuration … 2-85
software image … 2-81
transferring … 2-88
Web-Auth pages … 5-8
filter
for local MAC authentication
applying to a WLAN … 13-77
combined with other authentication … 1-28
configuring … 13-74
defined … 13-74
Web browser screen … 2-16
creating … 2-17
disabling … 2-21
hiding … 2-21
firewall … 1-37
flash memory
browsing … 2-34, 2-94
logo files in … 5-32
Web-Auth pages in … 5-8