Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater
Table Of Contents
- ProCurve Wireless Edge Services xl Module and ProCurve Redundant Wireless Services xl Module
- Title Page
- Copyright and Disclaimer Notices
- Table of Contents
- 1. Introduction
- Contents
- ProCurve Wireless Edge Services xl Module
- Wireless Networks and WLANs
- The Interface Between the Wireless and Wired Networks
- Layer 2 and Layer 3 Operation
- Determining the Layer 3 Services Your Wireless Edge Services xl Module Should Provide
- IP Routing
- DHCP Services
- Security Features
- Traffic Management and QoS
- Management Capabilities and sFlow
- RP Licensing
- Radio Ports
- Redundancy Groups
- Layer 2 and Layer 3 Roaming Between RPs and Modules
- 2. Configuring the ProCurve Wireless Edge Services xl Module
- Contents
- Management Interfaces
- Radio Port Adoption
- System Maintenance
- Software Images
- Configuration Files
- Viewing Configuration Files
- Transferring, or Copying, Files
- Transferring Configuration Files from an FTP or TFTP Server to the Wireless Edge Services xl Module
- Transferring Configuration Files from the Wireless Edge Services xl Module to Another Destination
- Managing the Directory Structure and Browsing for Files
- Deleting a Configuration File
- Returning the Startup-Config File to Factory Default Settings
- Update Server
- Password Encryption
- SNMP Traps and Error Reporting
- Radio Port Licenses
- Setting System Information-Name, Time, and Country Code
- Enabling Secure Network Time Protocol (NTP)
- Digital Certificates
- 3. Radio Port Configuration
- 4. Wireless Local Area Networks (WLANs)
- Contents
- Overview
- Configuration Options: Normal Versus Advanced Mode
- Configuring a WLAN
- VLAN Assignment
- Traffic Management (QoS)
- 5. Web Authentication for Mobile Users
- 6. IP Services-IP Settings, DHCP, and DNS
- 7. Access Control Lists (ACLs)
- 8. Configuring Network Address Translation (NAT)
- 9. Fast Layer 2 Roaming and Layer 3 Mobility
- 10. Redundancy Groups
- Contents
- High Availability for Wireless Services
- Configuring a Redundancy Group
- Configuring Redundancy Group Settings
- Adding Members to the Redundancy Group
- Enabling Redundancy
- Viewing Information about the Redundancy Group
- Viewing Information about the Other Members of the Redundancy Group
- Setting up Adoption Preference IDs to Control RP Adoption
- Reverting RPs Adopted by a Standby Member to the Active Member
- 11. RADIUS Server
- Contents
- Overview
- RADIUS Authentication
- Configuring the Internal RADIUS Server
- Choosing the Authentication Type for 802.1X/EAP
- Specifying the RADIUS Server’s Digital Certificate
- Choosing the Source for User Credentials
- Configuring the Local RADIUS Database
- Using LDAP for the Data Source
- Specifying a Domain Proxy RADIUS Server
- Specifying Global RADIUS Settings
- Adding RADIUS Clients
- Starting and Stopping the RADIUS Server
- Enabling Authentication to the Internal Server on a WLAN
- Configuring the Internal RADIUS Server
- RADIUS Accounting
- 12. Configuring Tunnels with Generic Routing Encapsulation
- 13. Wireless Network Management
- Contents
- Overview
- Monitoring the Wireless Network
- AP Detection
- Configuring Station Intrusion Detection
- Logging and Alarms
- MAC Filters (Local MAC Authentication)
- Network Self Healing
- 14. sFlow Agent
- Appendix A - ProCurve Wireless Services xl Module Command Line Reference
- Contents
- Overview
- Manager Commands
- Global Commands
- Interface Commands
- Wireless Commands
- Show Commands
- Show Commands (All Contexts)
- show alarm-log
- show commands
- show crypto
- show debug
- show file
- show flash
- show history
- show hostname
- show interfaces
- show ip
- show licenses
- show logging
- show management
- show password-encryption
- show redundancy-group
- show redundancy-history
- show redundancy-member
- show running-config
- show snmp
- show sntp
- show startup-config
- show terminal
- show time
- show timezone
- show upd-server
- show upgrade-status
- show version
- show vlans
- Show Commands (Wireless)
- show wireless ap-detection-config
- show wireless approved-aps
- show wireless channel-power
- show wireless config
- show wireless ids
- show wireless mac-auth-local entries
- show wireless phrase-to-key
- show wireless radio-config
- show wireless radio-statistics
- show wireless radio-status
- show wireless regulatory
- show wireless rp-images
- show wireless rp-status
- show wireless rp-unadopted
- show wireless self-heal-config
- show wireless station
- show wireless station-statistics
- show wireless unapproved-aps
- show wireless web-auth-config
- show wireless wireless-module-statistics
- show wireless wlan-config
- show wireless wlan-statistics
- Support Commands
- Support Commands (All Contexts)
- Support Commands (Wireless)
- Index
- Back Cover
Index – 15
configuring on WLAN … 4-40, 5-10
definition of … 5-2
encryption for WLAN with … 5-29
logo
adding to failed page … 5-23
adding to login page … 5-16, 5-17
adding to welcome page … 5-20
overview … 1-26
process
explained … 5-3
illustrated … 5-5
RADIUS
server … 5-5, 5-14
server settings … 4-43
roaming between modules … 9-4
VLAN interface required … 5-9
Web pages
advanced … 5-26
failed page … 5-7, 5-21
location in flash memory … 5-8
login page … 5-6, 5-16
logos for … 5-32
on external server … 5-24
on internal server, customized … 5-26
on internal server, default … 5-16
welcome page … 5-18
WebUser Administrator
adding guest accounts as … 2-49
creating … 2-42
defined … 2-42
deleting guest accounts as … 2-52
printing guest accounts as … 2-54
viewing guest accounts as … 2-52
Web-Users
authenticating … 2-45
creating … 2-42
roles … 2-41
WEP
dynamic (802.1X) … 4-53
open-key authentication … 4-50
shared-key authentication … 4-76
static … 4-49
key length … 4-53
specifying key … 4-51
Wi-Fi Protected Access
See WPA/WPA2
Wired Equivalent Privacy
See WEP
Wireless Edge Services xl Module
accessing CLI … 2-7
accessing Web browser interface … 2-9
IP address … 2-6
model … 1-75
redundancy group … 10-2
route table … 6-12
RP licenses for … 1-50, 2-123
software image … 2-80
system time … 2-138
wireless intrusion detection
See station intrusion detection
wireless LAN
See WLAN
wireless multimedia
See WMM
Wireless Services Module 12 RP License … 2-123
installing … 2-128
PCM, managed by … 2-127
uninstall verification key … 2-128
uninstalling … 2-132
wireless services-enabled switch
auto-provisioning of Radio Port VLAN … 2-57
Web browser interface for … 2-10
wireless station
disconnecting … 13-7
viewing … 13-4
details … 13-8
IP address … 13-5
MAC address … 13-5
viewing VLAN … 13-6
WMM support … 13-9
wireless traffic
viewing all statistics for the module … 13-34
viewing statistics for a radio … 13-18
viewing statistics for a station … 13-12
viewing statistics for a WLAN … 13-26
wireless-services context
in CLI … 2-22
WISP heartbeats
radio ports … 13-89
WLAN
assigned to BSSID … 3-34, 4-11
assigning to a VLAN … 4-32
authenticating to internal RADIUS server … 11-33
choosing primary on BSSID … 4-18, 4-21
closed system … 4-66
configuration tasks … 4-26