Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-48
Configuring the ProCurve Wireless Edge Services xl Module
Management Interfaces
e. In the next field, specify how long the module waits for a reply from
the RADIUS server before retrying (or, on the final retry, declaring the
authentication service unavailable).
The timeout value is in seconds; specify a number from 1 to 1000.
f. In the next field, enter the shared secret.
This string must match the secret specified for the Wireless Edge
Services xl Module in the list of clients on the RADIUS server.
g. Click the OK button.
8. Click the Save link to copy these changes to the Wireless Edge Services
xl Module’s startup-config.
Logging In to the Module as a WebUser Administrator
WebUser Administrators, with their very limited rights, access a single screen,
from which they can manage guest accounts on the local RADIUS database.
Note A guest account is a temporary user account, and the user must belong to a
guest group.
Before the WebUser Administrator can add guests accounts, a user with
Network Administrator or SuperUser privileges must create a guest group on
the local RADIUS database.
For more information about the Wireless Edge Services xl Module’s internal
RADIUS server, see Chapter 11: RADIUS Server.
To log in as a WebUser administrator, access the Wireless Edge Services xl
Module’s Login screen, and enter the username and password for a user with
this role.
The screen illustrated in Figure 2-28 is displayed.