Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-59
Configuring the ProCurve Wireless Edge Services xl Module
Radio Port Adoption
VLAN. (See Figure 2-32.) However, if the downlink ports on both switches
carry only traffic from the Radio Port VLAN, you can make these ports
untagged members of the Radio Port VLAN.
Figure 2-32. Radio Port VLAN for an Indirectly Connected RP
Instead of using the default Radio Port VLAN, you can use any VLAN in your
network—even a VLAN that is used to transmit wired traffic. In this case, you
must manually tag the downlink port for this VLAN and configure other switch
ports for this VLAN as described above. In Figure 2-33, for example, the
network administrator used VLAN 300 for traffic transmitted to and from one
of the RPs.