Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-88
Configuring the ProCurve Wireless Edge Services xl Module
System Maintenance
Transferring, or Copying, Files
The Web browser interface allows you to transfer, or copy, configuration files.
You simply specify a source and a destination for the transfer. Valid selections
are listed in Table 2-3:
Table 2-3. Transferring Files to and from the Wireless Edge Services xl Module
When you select a source, the Web browser interface displays the fields that
are needed to copy a configuration file from that source. Likewise, when you
select a destination, the Web browser interface displays the fields that are
needed to copy a file to that destination. For example, to copy a file from a
TFTP server, you must specify fields such as the IP address and the name of
the file.
Transferring Configuration Files from an FTP or TFTP Server
to the Wireless Edge Services xl Module
To upload a configuration file from an FTP or a TFTP server to the Wireless
Edge Services xl Module, complete these steps:
1. Select Management > System Maint.—Config Files.
2. Click the Transfer Files button at the bottom of the screen. The Transfer
screen is displayed. (See Figure 2-54.)
From (Source) To (Destination)
Server—either an FTP or a TFTP server Wireless Edge Services xl Module
Wireless Edge Services xl Module • Wireless Edge Services xl Module
• Local disk
• Server—either an FTP or a TFTP server