Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-90
Configuring the ProCurve Wireless Edge Services xl Module
System Maintenance
4. In the Target section, specify the destination as the Wireless Edge Services
xl Module:
a. In the To field, use the drop-down menu to select Wireless Services
Module.
b. In the File field, enter the name that you want to give to the configu-
ration file.
5. Click the Transfer button. In the Status section at the bottom of the screen,
a message is displayed, reporting whether the transfer was successful.
Transferring Configuration Files from the Wireless Edge
Services xl Module to Another Destination
You can copy a configuration file from the Wireless Edge Services xl Module
to the module itself, an FTP server, a TFTP server, or the hard disk of your
workstation. Complete these steps:
1. Select Management > System Maint.—Config Files.
2. In the Source section, specify the source as the Wireless Edge Services xl
Module:
a. In the Source section, in the From field, use the drop-down menu to
select Wireless Services Module.
Figure 2-55. Management > System Maint.—Config Files > Transfer Screen
b. In the File field, use the drop-down menu to select the file that you
want to copy.