Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-91
Configuring the ProCurve Wireless Edge Services xl Module
System Maintenance
3. In the Target section, specify the destination. Choose a destination from
the To drop-down menu:
• Wireless Services Module—copy the file to another location on the
module
• Server—copy the file to an external FTP or TFTP server
• Local Disk—copy the file to the workstation on which you are running
the Web browser
The Target fields below change depending on the target type. The following
three sections give you guidelines for filling in the necessary information.
Copying a File to the Wireless Edge Services xl Module. You can copy
a file on the Wireless Edge Services xl Module to an new location on the
module. For example, you might want to copy a logo used for Web-Auth on
one WLAN to another WLAN. Follow these steps:
1. Complete steps 1 to 3 in “Transferring Configuration Files from the
Wireless Edge Services xl Module to Another Destination” on page 2-90.
2. In the File field, enter the name that you want to give to the configuration
file.
The filename should include the path for the location in the module’s
memory to which you want to save the file.
3. You can use the browse button to search the module’s directory and even
create a new folder for the file. See “Managing the Directory Structure and
Browsing for Files” on page 2-94 for more information.
4. Click the Transfer button. In the Status section at the bottom of the screen,
a message is displayed, reporting whether the transfer was successful.