Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-93
Configuring the ProCurve Wireless Edge Services xl Module
System Maintenance
8. Click the Transfer button. In the Status section at the bottom of the screen,
a message is displayed, reporting whether the transfer was successful.
At any point during the transfer, you can click the Abort button to cancel the
process.
After you have finished transferring files, click the Close button.
Copying a File to the Local Disk. To specify the local hard disk as the
destination, follow these steps:
1. Complete steps 1 to 3 in “Transferring Configuration Files from the
Wireless Edge Services xl Module to Another Destination” on page 2-90.
2. In the File field, enter the name that you want to give to the file.
3. Use the browse button to select the directory in which you want to store
this configuration file. See “Managing the Directory Structure and Brows-
ing for Files” on page 2-94 for more information.
Figure 2-57. Transferring a File to the Local Disk
4. Click the Transfer button. In the Status section at the bottom of the screen,
a message is displayed, reporting whether the transfer was successful.
At any point during the transfer, you can click the Abort button to cancel the
process.
After you have finished transferring files, click the Close button.
Browse
button