Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-109
Configuring the ProCurve Wireless Edge Services xl Module
SNMP Traps and Error Reporting
Each community name is assigned an access control, which determines the
operations an SNMP server can complete on the Wireless Edge Services xl
Module:
■ Read-only—The SNMP server can retrieve information from the module.
■ Read-write—The SNMP server can retrieve information and modify the
configuration settings.
By default, the public and trap communities have read-only access, and the
private community has read-write access.
The Wireless Edge Services xl Module uses the following SNMP v1/c2 com-
munity names:
■ public
■ private
■ trap
You can also set up traps using the SNMP v3 trap user.
Modifying SNMP v2 Communities
By default, the Wireless Edge Services xl Module names the read-only
community “public” and the read-write community “private.” To change the
community name or access control setting for these communities, complete
these steps:
1. Select Management > SNMP Access > v1/v2c.