Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-149
Configuring the ProCurve Wireless Edge Services xl Module
Enabling Secure Network Time Protocol (NTP)
Figure 2-91. Enabling Auto Key for Secure NTP
3. In the Auto Key field, use the drop-down menu to enable auto key:
• Host Enabled—The Wireless Edge Services xl Module requires clients
and neighbors to use auto key to authenticate themselves.
• Client only Enabled—The module uses auto key only to authenticate
itself to a server.
4. Click the Apply button.
5. To enable the module to use auto key with a particular neighbor, follow
these steps:
a. Click the Neighbor tab.
b. Select the neighbor and click the Edit button. (Or, add a new neighbor.
See “Configuring NTP Neighbors” on page 2-152.)
c. Select AutoKey Authentication.
d. Click the OK button.