Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-169
Configuring the ProCurve Wireless Edge Services xl Module
Digital Certificates
■ Keys—This screen lists the key pairs that have been created on the
Wireless Edge Services xl Module. You can associate a key pair with a
trustpoint, and the module includes the public key for that pair in the self-
signed certificate or the certificate request. (The Keys tab is shown in
Figure 2-114 on page 2-191.)
Using the Certificates Wizard
Use the Certificates Wizard to:
■ create a new certificate, either as a self-signed certificate or a certificate
request to be sent to a CA
■ upload a certificate (either a server certificate or a CA certificate) from
an external source
■ delete trustpoints, certificates, or keys
You can complete all necessary tasks for creating or installing certificates
through the Certificates Wizard. However, if you want to create a specific key
for a particular certificate, you must do so first in the Management > Certificate
Management > Keys screen.
To run the Certificates Wizard, complete these steps:
1. Select Management > Certificate Management and click the Trustpoints tab
2. Click the Certificates Wizard button. The Certificates Wizard Welcome
screen is displayed.