Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-189
Configuring the ProCurve Wireless Edge Services xl Module
Digital Certificates
Figure 2-113.Transfer Trustpoints from Server
3. In the Source section, select Server from the From field.
4. In the File field, enter the filename of the source trustpoint file.
5. In the Using drop-down menu, select the protocol for the external server,
either FTP or TFTP.
6. In the Port field, enter the respective FTP or TFTP port number; the default
port number (port 21 for FTP, port 69 for TFTP) should apply in most
cases.
7. In the IP Address field, enter the IP address of the FTP or TFTP server.
8. If you are using an FTP server, enter the login credentials:
a. In the User ID field, enter the username for your account on the FTP
server.
b. In the Password field, enter the password for this username.
9. In the Path field, enter the path where the trustpoint is stored on the server.
(If you are using a TFTP server, this field may not be required.)
10. In the Target section, Wireless Services Module is displayed in the To drop-
down menu.
11. In the File field, enter a character string to name the trustpoint on the
Wireless Edge Services xl Module.
12. Click the Transfer button. In the Status section at the bottom of the screen,
a message is displayed, reporting whether the transfer was successful.