Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-193
Configuring the ProCurve Wireless Edge Services xl Module
Digital Certificates
3. In the Source section, in the From field, use the drop-down menu to select
Wireless Services Module.
4. Use the next drop-down menu to select the key to be transferred.
5. In the Pass phrase field, enter a passphrase, which can include spaces and
special characters.
The passphrase encrypts the key pair, and, although optional, is recom-
mended for security. In order to decrypt and use the key, a person must
know the correct passphrase.
6. In the Target section, from the To drop-down menu, select the target for
the key transfer, either Server or Local Disk.
7. In the File field, enter the filename of the target key file. The default
filename is the name of the key being transferred.
8. If you specified a server target in step 6, specify the following for the key
transfer target:
a. In the Using drop-down menu, select the protocol for the key transfer,
either FTP or TFTP.
b. In the Port field, enter the respective FTP or TFTP port number; the
default port number (port 21 for FTP, port 69 for TFTP) should apply
in most cases.
c. In the IP Address field, enter the IP address of the FTP or TFTP server.
d. If you are using an FTP server, enter the login credentials.
i. In the User ID field, enter the username for your account on the
FTP server.
ii. In the Password field, enter the password for this username.
e. In the Path field, enter the path where the key will be saved on the
server. (If you are using a TFTP server, this field may not be required.)
9. If you specified Local Disk in step 6, click the browse button to choose the
directory in which to save the key.
10. Click the Transfer button. In the Status section at the bottom of the screen,
a message is displayed, reporting whether the transfer was successful.
11. After the key transfer is complete, click the Close button.
Transferring Keys from a Server or Local Disk to the Wireless Edge
Services xl Module. To transfer a key from either a server or a local disk to
the Wireless Edge Services xl Module, complete these steps:
1. Select Management > Certificate Management and click the Keys tab
2. Click the Transfer Keys button. The Transfer Keys screen is displayed.