Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-194
Configuring the ProCurve Wireless Edge Services xl Module
Digital Certificates
Figure 2-117.Transfer Keys from Server or Local Disk Screen
3. In the Source section, in the From field, use the drop-down menu to select
either Server or Local Disk.
4. In the File field, enter the filename of the source key file. If you selected
Local Disk as the source in step 3, include the path with the filename.
5. If you selected Server as the source in step 3, in the Source section, specify
the following for the key transfer source:
a. From the Using drop-down menu, select the protocol for the key
transfer, either FTP or TFTP.
b. In the Port field, enter the respective FTP or TFTP port number; the
default port number (port 21 for FTP, port 69 for TFTP) should apply
in most cases.
c. In the IP Address field, enter the IP address of the FTP or TFTP server.
d. If you are using an FTP server, enter the login credentials:
i. In the User ID field, enter the username for your account on the
FTP server.
ii. In the Password field, enter the password for this username.
e. In the Path field, enter the path where the key is stored on the server.
(If you are using a TFTP server, this field may not be required.)
The fields in this step do not apply to key transfers from a local disk
source.