Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

13-10
Wireless Network Management
Monitoring the Wireless Network
■ Roam Count (No de-authentication)—The module tracks the number of
times that the station has de-authenticated, which indicates the number
of times that the station has roamed away from the module (not between
RPs on the same module).
■ IDM Attributes—If you are using ProCurve Identity Driven Manager (IDM),
this section lists IDM settings received for the user accessing the network
through this station. Possible settings include a dynamic VLAN (which is
also called the user-based VLAN), access control lists (ACLs), priority
(which is the 802.1p value assigned to the user’s traffic), and ingress
bandwidth (which is displayed if rate limiting has been configured for the
user).
Viewing All Stations in a Layer 3 Mobility Domain
When your Wireless Edge Services xl Module is in a Layer 3 mobility domain,
it tracks all stations associated with any module in the domain. This informa-
tion prepares the module for implementing Layer 3 roaming should one of
these stations roam to it. In addition, the module must maintain information
about stations that have roamed away from it, but for which it still acts as
home module.
To view information about every station associated with any Wireless Edge
Services xl Module in the Layer 3 mobility domain, follow these steps:
1. Select Device Information > Wireless Stations.
2. Click the Layer 3 Mobility-Station Status tab.